Is anyone running the Zbroz front bumper on the axys?
I am. I smacked a tree at a pretty good clip and was impressed that the bumper failed like it was supposed to, saved my pipe and overstructure and plastics. I have lots of confidence in this bumper to run over trees when needed.
I know our Utah snow is a little different than other places, but the bumper holds no snow. I thought it might but have been pleasantly surprised.
I know our Utah snow is a little different than other places, but the bumper holds no snow. I thought it might but have been pleasantly surprised.
how was it to install? do the wrap around arms just rivet to the plastic or is there actual structure they connect to?
I have it. And their rear bumper. Rear is so so to my liking but overall happy. Front is excellent!!
Side wrap around a just rivet to fender. Includes the UHMW under plate for bulkhead protection and skid plate, use longer rivots for the bottom the ones included are kinda short.
Also you cannot reuse the belt holder cause it doesn't fit the bumper leg
Well worth the but imo
Not best pic of rear installed in mine
Here's prototype of rear.
Sent from my iPhone using Tapatalk
Side wrap around a just rivet to fender. Includes the UHMW under plate for bulkhead protection and skid plate, use longer rivots for the bottom the ones included are kinda short.
Also you cannot reuse the belt holder cause it doesn't fit the bumper leg
Well worth the but imo
Not best pic of rear installed in mine
Here's prototype of rear.
Sent from my iPhone using Tapatalk
Will the factory cover clear this bumper?
It does not look like it from the pictures because of the external side loops.
Anyone fit a cover over this front bumper?
It does not look like it from the pictures because of the external side loops.
Anyone fit a cover over this front bumper?
I have one on my sled now. The belt holder was reinstalled. I didn't put the bumper on. It was done at Carl's. The mechanic, Paul Madison, said that getting the belt holder back on was kind of a pain but he did it. I am glad because I didn't want to have to find another place for the spare belt. Mine is Polaris blue to match the sled. It looks good. it is much more integral looking than a lot of aftermarket bumpers. It is certainly an improvement over the used beer can bumper that comes on the sled.
Wish I had seen this bumper before ordering mine - I like that it connects back to the body so the ski loops can't get caught like on stock and other brands.
SAY What!!! Skis caught on bumper ....
I wanna see pictures , and story of how your tip was in a place it can't hardly see ???
SAY What!!! Skis caught on bumper ....
I wanna see pictures , and story of how your tip was in a place it can't hardly see ???
Gripper skis, even with SkiDoo rubbers, often fold up on me when making downhill turns. Sometimes it just tosses me, but sometimes the loop gets caught on the outside grab handle of the bumper - which can be a PITA to get undone.
Kudos to ZBros for the easy install. It was as slick as it gets for aftermarket stuff. Used slightly longer rivets for the skid plate as stated above. ZBros also notched the bumper where the belt holder goes so the scrench will now fit to secure the belt holder. It was slightly loose so used a small piece of rubber from an old motorcycle tube between the holder and bumper so it wouldn't rattle.
