Z-Bro's A-arms Polaris IQ/Pro Chassis 38.5"

[Angermangement890]

I have 2 sets of IQ/Pro Z-Bro's A-arms for sale. These are the new arm design and are graphite grey in color, new in the box. These use the stock tie rods, a-arm bushings and RMK/Pro shocks that measure 17" CTC.

New list is $475, will sell them for $440+ shipping. Pictures will be up next week.


1 set in stock and ready to ship!

 

[yz400ex]

He is awesome to deal with!! He will get ya hooked up for sure!! For any of your Zbroz stuff and Exit shock needs, this is the guy to go to..

 

[sled-fiend]

What is the difference with the "new arm design" as oppose to last years ones?

 

[Angermangement890]

What is the difference with the "new arm design" as oppose to last years ones?

The upper arm is the same design as last year. The lower A-arm has been redesigned for more clearance at the shock mount and added strength through its boxed design. The boxed design allows for a symetrical layout of the lower arm tubes for more clearance in the spring area. This design allows better paint adhesion as the powder can coat all of the ball joint area. The change to the graphite grey is beacause it is a more durable powdercoat.

Ill post some pictures as soon as I can.

 

[Angermangement890]

He is awesome to deal with!! He will get ya hooked up for sure!! For any of your Zbroz stuff and Exit shock needs, this is the guy to go to..

Thanks for the compliment, you were great to deal with!

 

[lurker]

What length center to center shock works with these arms ?

 

[guidoxpress]

What length center to center shock works with these arms ?

they will use 17" c-c shocks

 

[lurker]

Gotta learn to read and comprehend! Say's c to c in first post.

 

[yz400ex]

These are some pictures of the arms. These were a custom order so the color is the same as the old model instead of the new graphite grey, but these show what the new ones look like.. Awesome quality!!

 

[Angermangement890]

Still have a couple sets, can also get 43" arms for the same price.

 

[cwrolson]

They look too heavy! I'm just a little feller. Think I'll build my own...hmmm..yup it's decided

 

[827revdog]

ean are these a tru 38.5 wide? i know zbroz usually measures a little wider than advertised.

 

[AkLogan]

I like the new design. Is the rear bar on the lower arm also Arc'ed now like the front on the old design? Do they not rub on the springs not rub on the upper arms any more?

 

[Angermangement890]

I like the new design. Is the rear bar on the lower arm also Arc'ed now like the front on the old design? Do they not rub on the springs not rub on the upper arms any more?

The rear lower arm tube has some Arc, not as much as the front lower arm tube.
I'm not sure what you mean on the upper a-arms, I have only had 1 set of arms that had a fitment issue and it turned out that customer did not have the stock shocks/springs he said he did when he ordered. He had a set of custom wound 3.5" dia springs that rubbed very minimally on the left side a-arm, when a stock shock/spring was placed in the sled the fitment issue was gone.

ean are these a tru 38.5 wide? i know zbroz usually measures a little wider than advertised.

They are stock Pro/RMK width, which is reffered to as a 40" According to Z-bro's they are calling these 38.5", but they place the spindle in the same location (width wise) as my other 40" kits do.

 

[FCR112]

They are stock Pro/RMK width, which is reffered to as a 40" According to Z-bro's they are calling these 38.5", but they place the spindle in the same location (width wise) as my other 40" kits do.

So are the spindles the exact same width as stock arms with the zbroz 38.5" or no?

 

[Angermangement890]

So are the spindles the exact same width as stock arms with the zbroz 38.5" or no?

Yes the Z-Bro's arms place the spindle in the exact same position as the stock arms do.

Have 3 more sets in stock and ready for shipment.

 

[Timber12]

Will these fit a 06 iqr? Do you have any other kits that are narrower? Pm me please

 

[Angermangement890]

Will these fit a 06 iqr? Do you have any other kits that are narrower? Pm me please

Yes, the arms will fit an 06 IQR, you will need to use the pivot tubes and pivot bushings from an 05-10 IQ. 38.5" is the narrowest Z-Bro's currently offers.

Still have 2 kits left.

 

[rydningen]

Got any 43" wide setups for the PRO Assault available?

Also, could you post some pics of the arms in the color/finish they have.

 

[rts47sweep]

will it fit

I don't know to much about the z broz front ends. I have a 2008 Polaris IQR 600, If I buy this kit will all the bushings on my a arms pit the z rbroz? also will the stock spindles work with this kit?

thanks for your help