If you have/had a pipe on an 800R engine, lets here your take on it. Thanks.
XP Pipe: The Good, The Bad, The Ugly!
- Thread starter Ridin High
- Start date
pipes
i had a single system last year but didnt notice real gains, this year im going with a twin setup when they get it dialed
i had a single system last year but didnt notice real gains, this year im going with a twin setup when they get it dialed
If you don't mind me asking, what pipe did you have, and at what elevation did you usually run at?
pipe
dyno port i ride 7-9000 they make a pipe for up to 3000 and a seperate pipe for over 3000. when i sold it i noticed a crack in the weld that looked like it had been attempted to be fixed at their shop before they sent it out.
dyno port i ride 7-9000 they make a pipe for up to 3000 and a seperate pipe for over 3000. when i sold it i noticed a crack in the weld that looked like it had been attempted to be fixed at their shop before they sent it out.
W
Wyoming T/A
ACCOUNT CLOSED
we have had one 08 with a head and have one 09 with a pipe and the gains are similar---real kick a$$ gains are the head and pipe [SLP]
S
Steelhead Slayer
Member
Wy TA - I just had an SLP Y-pipe, pipe, can, and head installed on my 09' XP 163 800cc along with a cold air intake and lots of vents. I am not going to have much time until after the first of the year to tinker. Could you help me with some clutching specs to help me get started. Last year I went with Joe's set up and seemed to work good, but with all these add ons not sure where to start???? Thanks Man.
Steel head. Call josh at Turbo performance at 1-801-725-1391 He has a great cluch set up for the 800r with those mods. I have a 07 xrs with head, y-pipe, pipe, can, v-force 3's 2 cool vent kit, team secondary and best of all a shinny little hot dogger. This cluch set up ripps.
