has anyone else had the arms in the primary sieze up ? was out last weekend and started having problems when i went to the dealer they told me that the teflon couting on the pin bushings was the problem they r and r the bushings under warranty is this a common problem ?
xp clutch problem ?
- Thread starter canadiantreemagnet
- Start date
Have taken my arms out, and taken some steel wool to the pins to get them to swing freely.
Ace
Ace
C
canucklehead
Well-known member
mine too
At about 500km mine were pretty sticky, took them out and cleaned them up and they swing freely again. One of my rollers was really sloppy, about to fall apart. Dealer replaced all three.
At about 500km mine were pretty sticky, took them out and cleaned them up and they swing freely again. One of my rollers was really sloppy, about to fall apart. Dealer replaced all three.
W
Wyoming T/A
ACCOUNT CLOSED
we got 900 miles on 1 and 1000 on the other--no problems--over 300 on 377 belt and its like new
To much heat. Get a vent kit and cool that thing down. Check us out at xxxmodrods.com for a great deal on vent kits, as well as the new flexable snow flap.
Similar threads
