X-Fire/M series question, drive train

[Heypal]

I have an 06 X-Fire that I have all but converted to an M. I currently run a 151" Polaris Series 4 track that delivers lack luster performance. I would like to swap the track out for a 2.25 Power Claw. To do this, I will have to swap my drivers to the 3.0 pitch M Series units. As far as I know, I should be able to make this swap with no issues correct? In other words, the bulkheads are the same from X-Fire to M Series correct?

Thanks,
Pal

 

[Thunder101]

yep

 

[arctic2009]

I have an 06 X-Fire that I have all but converted to an M. I currently run a 151" Polaris Series 4 track that delivers lack luster performance. I would like to swap the track out for a 2.25 Power Claw. To do this, I will have to swap my drivers to the 3.0 pitch M Series units. As far as I know, I should be able to make this swap with no issues correct? In other words, the bulkheads are the same from X-Fire to M Series correct?

Thanks,
Pal

Only thing different from an M bulkhead to a crossfire bulkhead is the swaybar tube length. Other than that they are interchangeable. An M driveshaft should fit right in there

 

[Heypal]

Sounds good, now time to track down a Power Claw!

 

[arctic2009]

I saw one on hardcoresledder for like 150.

http://www.hardcoresledder.com/forums/326-arctic-cat/848121-153-powerclaw-track.html

 

[pigbristles]

I am getting ready to sale a 153 PC off a 2012 with 1500miles. Bought it for my 08 that I am now going to sell so I don't need it. $325 plus shipping. Jim