Detonation killed my cat.it is a bashercat inbreed between many cats and don't know who the father is.
But the engine was a tripple based on the 800-900 bottom end.
I know everyone hates these big heavy tripples and throws these junky motors away.so if you have a crank and parts for the 1004 based motor please let me know.
I can use 700 powderspecial pistons even if there used.
I could use a tripple crank 800 900 zrt.
If you have the whole top end 1000cc or bigger i might be interested.
Basically if you have any tripple parts used or new laying around please send me private message with what you have.
Orings gasket sets pistons
i'm running the 1000 cylinders with the 700 powder special pistons.
1000 thundercat cylinders just so you know.
Again if you have one piston or tweenty let me know.
If you have one cylinder let me know
i'm in washington near the oregon border.
I have a new set of wiseco pistons for the 900 tripple engine that are bored 10 over making them 80.5 mm
i have many sets of used wiseco stock 900 tripple pistons as well as heads and cylinders.one tripple set is lightly ported with some nikisil scuffing.ported and polished trail friendly.
Have a 151 finger track ported and a few screws that is not missing any fingers. Good shape.have a 144 2001 tunnel in good shape.will trade any of these items.
I just need help
bottom line is it snowed in portland and i didn't make it to the race fuel shop and i was at sea level,yah i scratched the itch and took it down the road on premium and octane boost.very exspensive mistake.
It ran like a raped ape before she scattered.:d:d:d:d
yah i'd do it over again because you can't make the itch go away without hitting the throttle.
Damn snow just does something to a feller.
Kinda like deer and elk season.makes a feller do some dumb things he knows not to do.hate lieing to boss calling in sick:d:d:d:d
GOT A TON OF 1000 THUNDERCAT CYLINDERS THAT CAN BE BORED INTO THE 1107.
But the engine was a tripple based on the 800-900 bottom end.
I know everyone hates these big heavy tripples and throws these junky motors away.so if you have a crank and parts for the 1004 based motor please let me know.
I can use 700 powderspecial pistons even if there used.
I could use a tripple crank 800 900 zrt.
If you have the whole top end 1000cc or bigger i might be interested.
Basically if you have any tripple parts used or new laying around please send me private message with what you have.
Orings gasket sets pistons
i'm running the 1000 cylinders with the 700 powder special pistons.
1000 thundercat cylinders just so you know.
Again if you have one piston or tweenty let me know.
If you have one cylinder let me know
i'm in washington near the oregon border.
I have a new set of wiseco pistons for the 900 tripple engine that are bored 10 over making them 80.5 mm
i have many sets of used wiseco stock 900 tripple pistons as well as heads and cylinders.one tripple set is lightly ported with some nikisil scuffing.ported and polished trail friendly.
Have a 151 finger track ported and a few screws that is not missing any fingers. Good shape.have a 144 2001 tunnel in good shape.will trade any of these items.
I just need help
bottom line is it snowed in portland and i didn't make it to the race fuel shop and i was at sea level,yah i scratched the itch and took it down the road on premium and octane boost.very exspensive mistake.
It ran like a raped ape before she scattered.:d:d:d:d
yah i'd do it over again because you can't make the itch go away without hitting the throttle.
Damn snow just does something to a feller.
Kinda like deer and elk season.makes a feller do some dumb things he knows not to do.hate lieing to boss calling in sick:d:d:d:d
GOT A TON OF 1000 THUNDERCAT CYLINDERS THAT CAN BE BORED INTO THE 1107.
Last edited:
