Wtb/ slp twin pipes pro x 800

[gaige2]

Hi, I'm looking for a good set of used SLP twin pipes, flanges and silencer box for my 04 PRO X2 800ves. I believe that the SLP part number is 09-845 for the correct application for my motor/machine.
I hope someone has a full SLP twin pipe system for my machine hanging on their garage wall looking for a new home.
Please let me know, or send me a PM and I'll get back to you as soon as possible.

Thanks for your time,
Gaige2

 

[hatchler]

If you are still looking, we have a set of twin SLP pipes for an 2003 RMK 800. If you think it will work let me know and we can talk more about it.

Thanks

 

[theultrarider]

Rmk pipes are different than the prox chassis. The prox will work in an edge, but not the other way around....not without beating them up pretty bad anyway. I have seen it done and it is not pretty.

 

[mattymac]

If you are still looking, we have a set of twin SLP pipes for an 2003 RMK 800. If you think it will work let me know and we can talk more about it.

Thanks

Just tryin to help...

The prox has a shock tower support that is diffrent than a standard edge chassis. The angle at which the pipes come off the cylinders is a little more downward. You can make a standard set work with just a little fabrication.

And there might be a diffrent support on the bottom of the pipes where they rest on the chassis under the expansion chamber for the prox as well, not 100% off the top of my head though.