WTB PSI Head

[Turbotater]

Need heads for 925 or 990.

 

[PROTECH]

PSI heads

Do you have any 925 cylinders? How much for 990 pistons, and do they come complete{rings, pins,clips}? Any geskets or o-rings? I have a 925 with one questionable cylinder, piston is shot. Do you know if the cylinders are coated or if you can hone them?

 

[Turbotater]

I have 2 925 cylinders. I'm planning to bore them to 91mm and use my pistons in them.
Pistons are in kit form (rings, pins, clips) and are coated. $250 ea.

 

[cgsleds]

do you have any 1085 pistons

 

[Turbotater]

No 1085 pistons.
I can have some made but have to do a minimum order of 12.

 

[PROTECH]

PSI heads

Do you have any of the 925 88mm pistons? I talked to a couple that said my cylinder is o.k. so I'm looking for a good piston w/rings. How close are you to Idaho Falls?

 

[Turbotater]

Do you have any of the 925 88mm pistons? I talked to a couple that said my cylinder is o.k. so I'm looking for a good piston w/rings. How close are you to Idaho Falls?

I don't have any.
I've had a lot of inquiries on them but thats it.
If enough guys with them would get together and pool their money I
wouldn't have a problem getting some made. Just not enough movement
in them for me to jump into it with my money and sit on most of them for 2 or 3 years. Same as the 95mm ones for
the 1085.
If you have enough meat in your cylinders the thing to do would be to take them and your heads out to 91mm.

Im only 2 hours from IF. Between Twin Falls and Burley.