I have a Cutler dragon cat 1000 punched and stroked by Dakota Performance to a 1080. It is in my 2006 mod chassis. It is was originally a M7. The crank has bin done and it is EFI with boon docker. It puts out about 230hp+ at sea level on 30% race. In the mountains you can run pump gas with the head that is on it. I want to sell it and put a stock M1000 in the chassis it is a little to rank for me. Not very many miles on under 500. Commpression is good. I wanted $4000 us plus shipping. I priced this motor to build is $8000 us and you have to supply the block. If you did buy this you could put your stock engine for sale and probably get $2000 or better and it would only cost you 2K to get a 230hp sled. This engine is a tourque monster I am running 85gram weights at 3000ft and still rev a little high. It's peak power is at about 7850- 8000 rpm. Not for the faint at heart. I live in Vermilion Alberta Canada postal code t9x 1p3 if you wanted to get a shipping quote. Comes with ceramic coated cpc twin pipes as well and all electrical and efi set up ready to put in and pull rope.
