Im lookin 4a complete big triple 1220 or bigger to put in a drag sled
WTB: Big triple
- Thread starter turbo cat man
- Start date
Big Dog Triple
Check with Brad at www.poweraddictionracing.com he has the best one out there rite now, there is also 2 on AM snow 1 is a 1500 Crank Shop, the other is a 1400 Hooper, both are around the 275 to 320 HP range depending on altitude, fuel and carburetors, the other one is a Engine-Tech 1725 here on SW go back about 3 months, figure out how long the run is, if it is a 300 or 600' your best bet would probably be the Hooper lightest and around 275 to 285 HP with 50's and C-15.
Check Brads sight out first, he builds a 3 or 4 cylinder complete billet, case, cylinders, and heads, he has the crank shaft situation dialed in to perfection, and he is also on the W coast.
cmx@digitalpath.net or Jim @ 530-283-3241
Check with Brad at www.poweraddictionracing.com he has the best one out there rite now, there is also 2 on AM snow 1 is a 1500 Crank Shop, the other is a 1400 Hooper, both are around the 275 to 320 HP range depending on altitude, fuel and carburetors, the other one is a Engine-Tech 1725 here on SW go back about 3 months, figure out how long the run is, if it is a 300 or 600' your best bet would probably be the Hooper lightest and around 275 to 285 HP with 50's and C-15.
Check Brads sight out first, he builds a 3 or 4 cylinder complete billet, case, cylinders, and heads, he has the crank shaft situation dialed in to perfection, and he is also on the W coast.
cmx@digitalpath.net or Jim @ 530-283-3241
Last edited:
![P1000375[1].jpg](https://www.snowest.com/forum/data/attachments/133/133447-8ab4e6e29126c8c68616e5ab5bca1fc7.jpg?hash=irTm4pEmyM "P1000375[1].jpg")
![P1000376[1].jpg](https://www.snowest.com/forum/data/attachments/133/133452-cba53fec7e31183deab4f483c7fcade5.jpg?hash=y6U_7H4xGD "P1000376[1].jpg")
