WTB 09-11 XF 141" rails

[mountain man123]

looking to buy rails from a cat xf 141" part number 3604-395, if they have hyfax on them i may pay extra, if not no big deal. need to be straight and no egged out holes.

Thanks!

 

[mountain man123]

ttt

 

[MTN_VIPER]

mountain man123,

Not sure if they are the same, but I will have a set of 2014 brand new take-offs with hyfax.

Shoot me a PM if interested.

Bill

 

[mountain man123]

if they are off the xf with a float skid they might work, as they new xfs have 2 types of rails. ill ask around some.

 

[MTN_VIPER]

Yes, its a XF7000 snopro cross country with a float rear shock and a coil spring front shock.

 

[mountain man123]

think you could take some measurments for me so i can compare with mine?

from center of holes, rear arm location hole to the front arm location hole.
front arm location hole to front shock mount hole.
front shock mount hole to tip of rail.
from the bottom of the hyfax to the front arm mount hole.
from the bottom of the hyfax to the rear arm mount hole.
finally the front arm mount hole to the rail tip.

i think those should get me a good idea of it it will work or not.

 

[MTN_VIPER]

I'm hoping to have the skid out some time this week. Once I have it out and the rails off, I should be able to get those measurements for you.

Bill

 

[MTN_VIPER]

I have the skid out, however not sure if the rails will work for you though. Something that I had forgotten about is that the newer skids use a tri-hub rear wheel set-up and the hardware/mounting is different.

 

[mountain man123]

yea im seeing that too, well darn.