Won't start, no spark

[RobGee]

Rode today, sled started revving funny, like it was hitting limiter, but it was around 7k, dash also stopped working. Looked at relays between over structure and noticed some serious corrosion. Switched relays and sled ran great and dash began working again. Got it back to house and tried to use an ignition relay from the auto parts store and couldn't get dash to fire up again. Tried a mismatch of combos, old relay/new relay, one relay disconnected, etc, could not get dash fired up and now can't even get sled to turn over, even took relays from working axys and still no go. Checked for spark and there is none. Is there fuses I can check? Any ideas? Dumping here too......

Any input is appreciated

PS
What are the two relays for that are between the over structure? (They are 20A/35A relays)

 

[SRXSRULE]

Rode today, sled started revving funny, like it was hitting limiter, but it was around 7k, dash also stopped working. Looked at relays between over structure and noticed some serious corrosion. Switched relays and sled ran great and dash began working again. Got it back to house and tried to use an ignition relay from the auto parts store and couldn't get dash to fire up again. Tried a mismatch of combos, old relay/new relay, one relay disconnected, etc, could not get dash fired up and now can't even get sled to turn over, even took relays from working axys and still no go. Checked for spark and there is none. Is there fuses I can check? Any ideas? Dumping here too......

Any input is appreciated

PS
What are the two relays for that are between the over structure? (They are 20A/35A relays)

Try unplugging the key switch and see if it starts. The relays your talking about I believe are for the exhaust valve controller. Eric

 

[JJ_0909]

Same thing happened to me. Was the wiring harness plug from the "mode", "headlight" and "grip warmers" under the center console. It gets wet and throws all sorts of weirdness at the ECU.