Will Fox Floats from a Pro RMK (Ski Shocks) Fit an Axys ??

[frntflp]

Appears to be the same length with 17.25" mounting hole distance. But before I snag the good condition Fox Floats off my 15 Pro and install on the 18 Axys RMK, I'm wanting to make sure I'm seeing this correctly.

Thank you in advance !

 

[ak]

Appears to be the same length with 17.25" mounting hole distance. But before I snag the good condition Fox Floats off my 15 Pro and install on the 18 Axys RMK, I'm wanting to make sure I'm seeing this correctly.

Thank you in advance !

There 16.6 on the axys rmk 2016 to 2018

 

[Sheetmetalfab]

There 16.6 on the axys rmk 2016 to 2018

And the 2015 “pro rmk” should be 16.65” also.

The 11-12 pro rmk and 11-15 rmk standard have the 17.25” shocks.

 

[FriscoProx]

Been running 17.25" Floats on my 16 AXYS since it was new. They work really well. 400 miles with stock a-arms, the last 1200 miles with 36" Alt_I's.

 

[frntflp]

Hmm, I starting to get the impression this could work after all. Need to dig further as my starting point of 17.25 might be wrong. Or maybe pull out the stock WE shocks from the Pro and measure (just remembered that I still have them - duh !). Should be pretty easy to decipher between 16.6 and 17.25.

Thanks all !

 

[Teth-Air]

Hmm, I starting to get the impression this could work after all. Need to dig further as my starting point of 17.25 might be wrong. Or maybe pull out the stock WE shocks from the Pro and measure (just remembered that I still have them - duh !). Should be pretty easy to decipher between 16.6 and 17.25.

Thanks all !

I measured a set of stock clickers from 16 AXYS last night and for sure they were over 17" long. eye to eye. That 17.25" sounds right.