Will 600 speedo work on 800?

[be4life182]

Was wondering if I found a used 18-19 600 ctec2 speedo/tach/dash will it work in an ‘18 Aplha plug and play or will it have to be calibrated? I assume if it needs a different calibration the dealer could do this?

 

[boondocker97]

Have you tried comparing part numbers between the two? I would start there. If they are the same then should be no problem. I wouldn't try to mix and match ones that came off a sled with the iACT/ATACC suspensions.

 

[be4life182]

They are different, but cross reference. I guess my real question is will it need calibration of sorts and how to get that done, if anyone has done it.

 

[zl5600]

If it is Ctec to Ctec, they are the same.

 

[be4life182]

Really? Almost too good to be true