Which track is the best for the 1100? I ride a lot of trails
To get to the deep stuff so was wondering if the 3 inch was trail friendly
To get to the deep stuff so was wondering if the 3 inch was trail friendly
Which track for 1100? 3 inch or 2.6 powerclaw
- Thread starter tmbl52
- Start date
Just my opinion...
I installed a 3" with 7tooth drivers mid season last year on my M1100T. Long story short, I wouldn't do it again, the 2.6 is really that good. The lugs on the 3" took a set within two rides in VERY good snow conditions, and I've found it to be faster on downhills then it was originally. You need to keep your speed down with the 3" on trails, or it will overheat & start to toss lugs... even with the scratchers down. Don't get me wrong, the 3" is a great track, but the 2.6 isn't far behind IMHO.
I installed a 3" with 7tooth drivers mid season last year on my M1100T. Long story short, I wouldn't do it again, the 2.6 is really that good. The lugs on the 3" took a set within two rides in VERY good snow conditions, and I've found it to be faster on downhills then it was originally. You need to keep your speed down with the 3" on trails, or it will overheat & start to toss lugs... even with the scratchers down. Don't get me wrong, the 3" is a great track, but the 2.6 isn't far behind IMHO.
Thanks, it's a 12
