Which adj weights for mountains?

[ReTodd]

Time for me to get a set....don't really need a lake racing set so who has best profile for boon docking mountain riding?

 

[SRXSRULE]

I was very happy with my Dalton / Culter Perf (same weights from each co.) adjustable weights. They are polaris series 10 profile and use set screws installed down the center of the weight with the weight still installed in the clutch so you can add/remove weight in about 1-2 minutes with only using an allen wrench. Eric

 

[Jreng87]

I ride 10k+ and was running the 10-60 weights. They were ok, but not great. I ordered a set of 10-58s and the difference was awesome. To me the Polaris specs for elevations are on the conservative side.

 

[sledheadd]

I have been happy with MDS weights

 

[wfieldin]

Ditto

I have been happy with MDS weights

Ditto

 

[TRS]

I was very happy with my Dalton / Culter Perf (same weights from each co.) adjustable weights. They are polaris series 10 profile and use set screws installed down the center of the weight with the weight still installed in the clutch so you can add/remove weight in about 1-2 minutes with only using an allen wrench. Eric

These seem to be working also. Need more testing.

 

[tdblakes]

What range of adjustability do the MDS have? Specs call for a 8g-10g swing from riding at home to riding at altitude, is that something you can do with 1 set of MDS or would there be 2 sets required?

 

[wfieldin]

http://www.mdsclutching.com/

What range of adjustability do the MDS have? Specs call for a 8g-10g swing from riding at home to riding at altitude, is that something you can do with 1 set of MDS or would there be 2 sets required?

Give Steve a call:

http://www.mdsclutching.com/

 

[sledheadd]

What range of adjustability do the MDS have? Specs call for a 8g-10g swing from riding at home to riding at altitude, is that something you can do with 1 set of MDS or would there be 2 sets required?

On my pro i can set my clutches up for 2000' all the way to 10-12' with one set of MDS weights. Now if you are running a turbo I believe that Steve also has a set of turbo weights.
On my ported pro I run blk/gr spring loaded to 71.5 for 5-8k
blk spring loaded to 78 for 2k

 

[Madtown]

I ride 10k+ and was running the 10-60 weights. They were ok, but not great. I ordered a set of 10-58s and the difference was awesome. To me the Polaris specs for elevations are on the conservative side.

Good to know as I am about to do some riding in the 10K-13K range & was about install the 10-60's. I will install the 10-58's & bring the others also.