Where to buy an AEM o2 sensor?
- Thread starter snowmanx
- Start date
B
badass1000
Well-known member
all the different widebands us pretty much two different oxygen sensors with two different connectors. is it a bosch lsu 4.2? is the plug rounded on one side or is it square? Do a search on the internet.
you can buy the stock 02 sensor off of a turbo vw bettle or certain years and models of cadilacs from any auto parts store that will work with your aem.
you can buy the stock 02 sensor off of a turbo vw bettle or certain years and models of cadilacs from any auto parts store that will work with your aem.
Aem 02
PUSH TURBO $250.00 651-303-3867 Ken PUSHTURBO.com
PUSH TURBO $250.00 651-303-3867 Ken PUSHTURBO.com
B
badass1000
Well-known member
the one from summit looks to be the correct one. right matching part number from aem. the picture on summits website must be wrong. The sensor pictured is not the correct one.
Rectangular plug is different then any thing I have ever had. alot of times it is the same sensor, just a different plug. I am sure their is still a replacement that could be bought at any local auto parts store. Just need to find out what sensor it is and what vehicles it comes stock on.
you could also call ken at push and I am sure he could get you just the 02 sensor.
Rectangular plug is different then any thing I have ever had. alot of times it is the same sensor, just a different plug. I am sure their is still a replacement that could be bought at any local auto parts store. Just need to find out what sensor it is and what vehicles it comes stock on.
you could also call ken at push and I am sure he could get you just the 02 sensor.
Last edited:
H
hatchers
Well-known member
the guy is only looking for the sensor itself....
of any auto parts store, NAPA is by far the cheapest @ $130/ea
whats the part # at car quest?
H
hatchers
Well-known member
is this a boush??? whats the part number?
Y
yamaha_junky626
Member
aem wide band sensor
here is a ac delco # 213-1572 you should be able to use this number at most auto part stores.
here is a ac delco # 213-1572 you should be able to use this number at most auto part stores.
S
spooled flatlander
New member
Replacement probes are available from Summit Racing for 65 bucks
part # 30-2001
part # 30-2001
AEM calibrates all of their sensors at the factory and then installs resistors inline in order to eliminate the need for free air calibration every so often. Be sure you get the calibrated sensor.
I just threw my innovate LC-1 away. It was still working, but I had heard the AEM's were better. Man if I knew how much better I would have done it a long time ago!
I just threw my innovate LC-1 away. It was still working, but I had heard the AEM's were better. Man if I knew how much better I would have done it a long time ago!
S
supraturbo
Banned
got mine from ebay also at 64$ and free xenon h11 bulb as a gift! all this without hassles.
I had a problem with this as well and water ended up inside, causing it to malfunction. I had to take it apart, dry it out, and now it works fine.
This is what I did, I cut a square piece of freezer baggie (freezer is thicker) out of a sandwich bag, took off the silver screw cap, put the cut plastic over it, then screwed the cap back on, trim the edges.
So far it seems to have sealed it up and it hasn't condensated or gotten wet inside.
This is all I could think of doing.
Hope this helps.