What's Bent?

[03RMK800]

Hello,
I am trying to figure out what is bent on an 06 700 RMK. I have been assuming its really serious like the frame/chassis itself, but have to be more certain as I plan a rebuild, engine swap, align it, or walk away. Guesses, speculation, answers and advice are very welcome. Thanks!
Alan

 

[kanedog]

Bow legged sled, most likely a birth defect.

 

[03RMK800]

I see it as the opposite of bow leg-- its a knock-knee condition affecting only one side. Whatever it is, I would like to figure out the source.

 

[retiredpop]

It looks like the tie rod needs to be adjusted as it is too long. Outer tie rod end seems to have quite a few threads showing and maybe the inside is just about backed out all the way.

 

[rmk8001]

Your lower a arm is done. The rear tube is dented and bent the front tube is starting to bow also

 

[03RMK800]

Thanks! I hope the damage is contained to the steering rod and lower A arm. Your responses give me some hope for a quicker/easier fix than tearing into the chassis!

 

[whoisthatguy]

Ski looks like it is bent up as well.

 

[03RMK800]

Thanks. Ski might have a little warp. I have had good luck heating/bending skis and will probably heat this one up, too.