what to do?

[waitemr13]

so after going back and forth on if I should keep my 2013 pro rmk 155 or trade it in on a new m8000 I have decided to keep the rmk but don't know what direction to go on mods for it. so if you guys can help answer some or all of my questions that would be a lot of help.

1 what's a good pipe for this sled? and if I put a pipe and can on it what else has to be done to it?

2 what is your thoughts on doing a gear down kit?

3 has anyone had there tunnel painted and how far did you have to strip the sled down?

4 what's the best vent kit for this sled any is it really worth doing?

any other mods that are highly recommended would be great..

thanks for any help you give...

 

[Reg2view]

Been in your position before. Consider putting some pistons in it, ride it mostly stock for another season, and get the 16 RMK with the ho motor. Since you were considering a new sled anyways. If you have confidence that poo won't screw it up. Same bet as those who bought the 11 RMK. Good luck.

Vent-wise, hard to beat the blowhole if you ride in the deep a lot. Not cheap, but effective if you're going to use it often.

 

[goforbroke]

hard to improve on the stock RMK. If in trees and technical gear down is worth it, but it takes some of the top end away. I like the 3" track, but it has pluses and minuses. pipe and cans don't do much for this sled. slp stage 4 or turbo is better HP, but worth the money?