lets see your summer modifcations or new sleds.
What Sled Are You Riding This Year
- Thread starter 2001rmk700
- Start date
Still riding my 2000 RMK with PSI 800. But this year I made a cromoly steering post and hopefully adding twin pipes and getting rid of the dial-a-domes....and maybe a mesh hood.
Last edited:
E
Ex-Member
ACCOUNT CLOSED
Still be on the 900... Replaced gaskets, cleaned EVs, new throttle cable, cleaned up a bit, front radiator's gone, sway bar's gone.... Simmons skis, that doesn't really count since I got those after i busted the stock one in march... GPS RAM-mount and power, TCP bumper's on order (still... been about 2 months now), replaced TPS wiring harness (piece of scht wire anyway), few other minor "mods"....
T
the_hog
Member
Still going to be riding my CMX/PSI GenII RMK mod. Going to try and get it under 440lbs dry. I am having powdersledder build me a Team PMM chromoly steering post and some Team PMM aluminum radius rods. Then I may be digging into the M10 to lose some weight there. I am at 447lbs dry right now. Also will be adding a Racepak UDX and some scratchers.
Also thinking about picking up a 01 SRX for this coming winter.
Also thinking about picking up a 01 SRX for this coming winter.
Last edited:
A
AkHockey10
Well-known member
hopefully a 05 summit 800 custom rev 144" 
or
a semi-mod 02 800 summit 151" -
headlight delete, gas rack delete, RKT drop-in piston kit, pods,
smaller bar riser, freestyle seat, AC 12 gal fuel tank, speedo delete, maybe go with TRA3 clutches, etc.
or
a semi-mod 02 800 summit 151"
- headlight delete, gas rack delete, RKT drop-in piston kit, pods,
smaller bar riser, freestyle seat, AC 12 gal fuel tank, speedo delete, maybe go with TRA3 clutches, etc.
Last edited:
01' Summit X hmk. Pilot skis, 162 A20 track backwards, homebuilt tunnel, big wheel kit, ported cyl., shaved head, thick basegasket, and a big ole' bar riser!
A
AkHockey10
Well-known member
'07 Pol IQr - still waiting to install - 159 x 2 finger track, 9 gal tank, 6" bar riser w/Cat M8 mtn bar, clear BR tech liteweight hood, ice scratchers, and a few Ti goodies. Here is what it looks like for now.
440 is out & 155hp UBR 600 (w/twin Crank Shop pipes) is in!!
9 gal tank just arrived, so now I can install the new brake line & wiring harness before I get to work on the airbox.
The twin pipes should look good through the clear hood!!
After the 600 fires up, I'll take it for a few runs on the grass before I get started on the 159'" finger track.
440 is out & 155hp UBR 600 (w/twin Crank Shop pipes) is in!!
9 gal tank just arrived, so now I can install the new brake line & wiring harness before I get to work on the airbox.
The twin pipes should look good through the clear hood!!
After the 600 fires up, I'll take it for a few runs on the grass before I get started on the 159'" finger track.
L
lightening800
Well-known member
sled
boosted dragon also, sled not here to show pics of it yet.
boosted dragon also, sled not here to show pics of it yet.
09 d8 163
Have boxes of aftermarket goodies. Waiting, Waiting Waiting!!!
Snowed today. Yee Haa.
Have boxes of aftermarket goodies. Waiting, Waiting Waiting!!!
Snowed today. Yee Haa.
Still on my 2004 cat 900s. One EFI one CARB. The carb should be a 1000 before the season starts. The EFI still rocks they way it is! I did just order a powder claw for one of them not sure which one gets it. The other is going to get a 162 16 maverick.
Last edited:
2005 rt 1000 pipe can, simmons digitrons, 2 inch riser stretched to 162 8 inch bigwheel, large vents and some custom paint!!
need pictures with the cutdown windshield, handguards, and the smittys drop brackets on it!
need pictures with the cutdown windshield, handguards, and the smittys drop brackets on it!
08 XP 154 and 07 XRS 159, as well as the back up M8's and M6
08 dragon 800-163..a few minor changes...
gots any pics??
No, none right now, she's kinda torn apart, will post pics when I'm done though!
09 800 XP 163. Blue and white. I would love to make it all white like this.my new baby!
Similar threads
