What RPM for my 07 M1000

[Saddle sore]

What RPM should my 07 M1000 snopro 162 with PC Track be running at.
Here is what I have on it,
Bikeman y-pipe and can
Boondocker box
Speedwerx air intake
I have the bikeman Fatazz pipe to go with this but I have not yet bought the power valve dellet kit to put it on. What RPM should it be at with the pipe on it.

 

[slyrydr]

What RPM should my 07 M1000 snopro 162 with PC Track be running at.
Here is what I have on it,
Bikeman y-pipe and can
Boondocker box
Speedwerx air intake
I have the bikeman Fatazz pipe to go with this but I have not yet bought the power valve dellet kit to put it on. What RPM should it be at with the pipe on it.

with just the y-pipe and can...7200 rpm.....with the pipe, go to their web-site, it should be listed somewhere, if not call them...probably in the 74-7600 rpm range...

 

[73GOLIATH]

should be turning 7800 to 7850 with all the mods including the pipe

 

[SledFreakM1000]

Ive got speedwerx ypipe, single, and can. snopro airbox. RKT heads. RKT secondary. boondocker box.....Ive always been told 7450-7520 is where you need to be

 

[Paul Tupper]

I have a Bikeman performer kit and did some tuning this last weekend. I have a max rpm of 7650. Still figuring out the tuning end of things, Mike at Bikeman said that that rpm is the most I'll get out of that particular set up.

 

[jay_boom]

My 07 with speedwerx pipe, jaws y and can, d&d intake, boondocker, 36 deg helix and 65 g weights pulls 7650-just over 7700....talking with Brent Linderman he recommended 77-7800 on the m1k as that is where it will produce the most power??. Also I run the 046 belt, maybe I'll try an 060 for a few more r's and see how it runs.