What is the skidoo part number??

[monster967]

I cant find the part number for the wire harness that you are supposed to put on when you remove electric start. What if you don't get the new harness and just rock without it?

 

[MT boondocker]

If its on an XP you don't need any additional wiring.
If its on a Rev you need part number 515176175 for manuel start.
This is off of the 07 parts film.
http://12.2.215.22/pub/default.asp?SessionId=953d9f54f9ec4d5aa87b046f3bb0bf16&Lang=EN&brands=SKIDOO

 

[monster967]

I have an 06 800ho. I am assuming it is the same harness as the 07. Can i run the sled without it? why or why not. thanks

 

[MT boondocker]

I have an 06 800ho. I am assuming it is the same harness as the 07. Can i run the sled without it? why or why not. thanks

Same part number for both 06 & 07.
As for running w/o it, don't know, you may just want to try w/o it and see if everything works okay.

 

[griese]

Not trying to steal your thread but I have the same sled and my starter took a crap so I am looking into removing my electric start all together. It starts manually without the battery even in the sled. I am wondering if anybody knows what the differences between the manual and electric start harnesses are? I've heard that the primary is balanced so if you remove the ring gear you might have some balancing issues, is there any truth to that? Just looking for some input. Thanks in Advance

 

[2walla]

won't run w/out bat

On the 07, supposedly the sled won't start without the battery. Supposedly the ring gear is on the clutch to w/balance, but if you took it off and rebalanced it what could it hurt?