What do I need to swap 16 axys 163 3” track to a 3” powder claw.

[Rudy149]

What do I need to swap 16 axys 163 3” track to a 3” powder claw.

Just tore my track up and thinking of trying the 3” powder claw just curious as to what parts I need to change I’m also boosted any input or experiences would be appreciated thanks.


Sent from my iPhone using Tapatalk

 

[knocksum]

You will need to center port the power claw track or change drivers, cut rails and add anti stab. That can get costly.

I suggest the x3 for boosted sleds. Stiffer lugs that hold up and excellent downhill braking. Direct bolt on.

 

[summ8rmk]

Ur 163 is really a 162. Same as Cats 162 powerclaw. Other than center driver porting, its a direct swap.

[emoji12]

 

[cascadesnowjunky]

Just cut the center driver out and run it, same pitch as what you have.

 

[kgra]

You will need to center port the power claw track or change drivers, cut rails and add anti stab. That can get costly.

I suggest the x3 for boosted sleds. Stiffer lugs that hold up and excellent downhill braking. Direct bolt on.

Do you have experience on the factory 3” vs x3 with turbos? I’d be interested in the feedback as I was considering the 3” PC aswell.