I've done a bunch of searching on this but couldn't find anything quite like the problem I'm having.
The sled is a 2007 dragon 700 RMK, and when I press the reverse button, the reverse light on the dash lights up, but nothing else happens. It doesn't die or try to restart or anything. It just keeps running normally. I took the button apart and everything is fine there. I tried grounding the grey wire that goes to the button (that's what pushing the button does; I thought the ground might be bad), no change.
I checked the resistance on the crank position sensors; both are within spec. I also checked the clearance on the crank position sensors- both were 0.030", which I believe is right. Any other thoughts?
The sled is a 2007 dragon 700 RMK, and when I press the reverse button, the reverse light on the dash lights up, but nothing else happens. It doesn't die or try to restart or anything. It just keeps running normally. I took the button apart and everything is fine there. I tried grounding the grey wire that goes to the button (that's what pushing the button does; I thought the ground might be bad), no change.
I checked the resistance on the crank position sensors; both are within spec. I also checked the clearance on the crank position sensors- both were 0.030", which I believe is right. Any other thoughts?