Walker Evans Shock help! Rebuld info needed quickly

[this1ultraflyz]

I have Poo Edge 800 with Tri City Performance (TCP) Long travel kit on front. Kit came with Walker Evans model WER2233 Piggy back front shocks. I need
1. Internal Floating Piston (IPF) Depth
2. Pressure
3. What Weight oil

 

[sno_mo_racer]

Look for a 7 digit part # on the shock most likely starting with 704####

 

[this1ultraflyz]

these are not a Polaris take off? part # is WER2233 and Serial #20312 and other is serial #20317. they 18.5 eye to eye. No Poo Part# on them.

 

[sno_mo_racer]

Sorry couldn't find the info on those shocks with those #'s. Only used to the polaris part #'s to find specs. Maybe a shock shop will see this thread and find the specs.

All the walkers I have done were IFP depth of 2.25" and 200psi so am guessing they would be the same. Best to make sure though maybe give Tri City a call.

 

[TVC 15]

If they're piggy back the ifp height should be a little forgiving. If you need to get them going right away put the piston just off the bottom assemble the shock minus the cap for the ifp. Then cycle the shock and see how far the piston travels. Adjust if need be.

 

[this1ultraflyz]

I edited info request
Also need oil Weight recomended

 

[sno_mo_racer]

I like to use amsoil shock therapy and have been for a few years without problems.


My edits were for subscribing/unsubscribing to thread.