Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Vents

bobback

Well-known member
Lifetime Membership
I should have some cool clutches thanks to 2 cool vents and a a mtntk blow hole. Don't worry, I just haven't riveted the vent on yet over the clutch.

c1.JPG c2.JPG c3.JPG
 
I have some 2 cool stuff on mine and it works well. Didn't feel like dropping the 200+ on a blowhole, got a radiator fan off a dirtbike speced out the same as the blowhole, gonna throw it in the footwell and see how it does. Ill throw some pics up in a thread if it pans out well.
 
I have run Tammy's vents for years and 2 years now on the Axys with the one your showing directly infront of the clutch ( not the side)-
No Issues with heat - (but good clutching contribtes to that)
Had the blow hole- but never liked the new 90* exit out the side panel- the one on the 2011-2015 pros I likes due to the free flowing but sucked cause your left knee was always there.

Tammy's vents are second to none- and even though I only run one vent on my Axys.. it is very durable and looks "2 cool"
 
Bobback - Did you do anything to the right side? If so, how about some pics?

I ran 2 cool vents on my Pro and they worked well. A quality product from quality people.

I would recommend duct taping the front clutch vents prior to attempting creek crossings. Don't ask me how I know.
 
Did the same venting on the other side minus vent behind shock tower; as 2 cool doesn't make this one on the other side.

Also did a top vent like this on both sides:

PO-150 Axys Top.jpg
 
Premium Features



Back
Top