turbo kit build

[nytrocharged]

im building a turbo kit with a custom built intercooler and garret 2860 im just wondering what guys are running for the aux injectors and a part number would be nice if any one knows

 

[Boyko]

There is a lot of options out their.

What sled ya fabbing on? Are you building the injector housing and fuel rail yourself? What fuel controller you using?

Ask the company selling you the fuel controller what to use. Most use high impedance injectors and draw up to 1.5 amp each, low impedance injectors are controlled differently and can draw up to 6 amps and will blow out the drivers on some fuel controllers.

Depending if your have the factory injector tossing more fuel, if your using a rising rate regulator and the boost a 45 to 65 lb injector should be good.

 

[adam8781]

talk to bryce from www.turboboyz.com for the fueling, I would go with a boost it control box, turbo boyz billet intake with aux injectors, its easy to tune and once you have these two items all you need to worry about is fabbing the turbo system, intercooler and tuning the thing once its running. Are you doing your own custom water 2 air cooler? siliconeintakes.com and frozenboost.com have awesome parts if your doing a diy w2a

 

[silberpro]

If you want to build your own package, I agree with Adam, the Boost-it box would be great choice. Very easy to use, and works great.