Tunnel Sticker Removal

[BigDog88]

Do I need to keep the manufacturer stickers that are on the side of the tunnel? I really like the look of no extra stickers/decals, but I don't want to remove something that I really need to have.

Thanks,
Andy

 

[EBartling]

The emissions sticker leaves VOID written all over if you remove it- I left that one but removed the rest

 

[Trevor83T]

They are both removable. The emissions one splits in half and reads void so that it can not be transferred from one vehicle to another. With some time with a heat gun they both will come off though. Probably the most difficult ones on the whole sled to remove.

 

[Reg2view]

Wrap over them.

 

[polarisboyc]

Took all mine off, your vin is still there and i think thats all the really matters. As far as the void sticker just take some lacquer thinner and it takes it right off.

 

[Timbre]

Wrap over them.

Bingo!
Why go to the trouble to remove them?

 

[14RMK144]

Bingo!
Why go to the trouble to remove them?

I polished my tunnel
So i took em off.
OP didn't say he was doing a wrap, so he may be wanting a clean look. Pretty sure he already took off all the warning stickers.

 

[Indy_500]

My boots took care of em

 

[Jaynelson]

This may not be a concern, but you do need those decals to import the sled from USA to Canada or vice versa (selling it cross-border).

 

[SRXSRULE]

This may not be a concern, but you do need those decals to import the sled from USA to Canada or vice versa (selling it cross-border).

I was going to post the same thing! Eric

 

[BigDog88]

As stated above, I do not plan to wrap. I like the polished look. I don't think crossing the border should be an issue (no plans to do it).

Thanks guys.

 

[Drewd]

Those stickers I hear are similar to the tags on a pillow or mattress-remove them and you could go to jail

 

[Indy_500]

This may not be a concern, but you do need those decals to import the sled from USA to Canada or vice versa (selling it cross-border).

That is very disappointing to hear, especially when the manufacturer can't make stickers last a single season....

 

[14RMK144]

Those stickers I hear are similar to the tags on a pillow or mattress-remove them and you could go to jail

This may not be a concern, but you do need those decals to import the sled from USA to Canada or vice versa (selling it cross-border).

NO, if you look at pillow, mattresses, it says only to be removed by consumer. Only illegal to be removed by the retailer.
And as in earlier post, only needed if sold to person in another country. Even then I'll bet that customs may not even look for emissions stickers. And there may even be only a certain number of years that it may be needed.

 

[Jaynelson]

And as in earlier post, only needed if sold to person in another country. Even then I'll bet that customs may not even look for emissions stickers..

I wouldn't make that bet, as I have ran in to that exact problem due to the emissions sticker being missing. Best to keep things legit when selling cross-border unless you enjoy fines and misery lol