TRS alignment bar 21 850-23 900

[gongshowm1000]

Hey guys
I had a TRS clutch kit in my 21 850 Khaos. I just picked up my 23 9R Khaos. Anyone know if the alignment bar from the TRS kit will work for the 9R with the P-22? I’m assuming it will
Thanks Ryan

 

[ndfb35]

He updated the bar to work with the P22 and P85.

 

[SHERMAN]

It’s close but the bearing holds the bar up a bit throwing the alignment off a tad. I used the old one to ball park my 9r until the new bar comes in

 

[Sheetmetalfab]

@TRS

 

[diamonddave]

Here is the thread for the updated bar that works for both clutches.

P22/P85 alignment bar

We have redesigned the TRS alignment bar. The new bar will accommodate the P22 as well as the P85 with or without e-start. Bars were cut last week and are at the treater, expecting delivery next week. The bar will be a component of all TRS clutch kits going forward. The bar will also be...

www.snowest.com

 

[TRS]

Thanks guys.

 

[kylant]

what is the actual difference in the bars? I have both in my hands. the bars seem essentially identical. when laid on top of each other, the only difference i can see is the p22 bar has about 1mm more to the "ears" that rest on the primary. and the oval hole. everything else is identical. when checking the alignment, both bars are seeming to produce the same results ??‍

 

[TRS]

The P22/P85 bar nests higher in the primary to get away from the P22 center bearing.
To the eye they may look close, but they are not.

 

[kylant]

does that extra little bit of material on the "ears" keep it higher?

 

[diamonddave]

Yes