Trailer grips

[AK800VE]

Hey guys, what are you using for grips to get into your trailer. I sold my old enclosed trailer and dont remember the brand I had.

I am open to new ideas, whatcha got

Dont be affarid to post pics

 

[skibreeze]

We just use 1x2x15" strips glued and screwed to the ramp.

 

[crapchaser800]

I installed multi-glides from Dennis Kirk (Caliber brand I believe) on my 2 place open trailer and really like them. Went with the 6" wide to accomodate narrow stance of mountain sleds and wider stance for trail sleds.

 

[Olie3170]

We use the Paddle Grabbers from Triton. I have attached a few pics. I really like these, they have about 1/2" of clearance between the deck and the bottom of the horizontal bars so ice and snow etc. can easily slide out and not get stuck in there. Each side runs $25, it takes 2 to do the ramp on a trailer. They are nice to walk up and they are made out of tough plastic. Just my $.02.

 

[jsledder]

I use old hyfax cut into about 15" strips. Or, belting from a baler or conveyor.

 

[diggler]

an old plastic beadliner works great for skis.

 

[yamahahaha]

We use trailer glides for the skis and old roundbaler belt for traction works great and the price is right.

 

[Covey]

Super Glides work great for ski slides as well as traction for your track and feet. You also get very good traction with any tires.
Pm me if interested, i am a dealer.

 

[AK800VE]

We use the Paddle Grabbers from Triton. I have attached a few pics. I really like these, they have about 1/2" of clearance between the deck and the bottom of the horizontal bars so ice and snow etc. can easily slide out and not get stuck in there. Each side runs $25, it takes 2 to do the ramp on a trailer. They are nice to walk up and they are made out of tough plastic. Just my $.02.

Those are what i had on my old trailer, and i found some more the other day. I really like them

 

[Toll]

Ski guides and Traction grips

Mirage has a fully functional online parts store and we have great prices on the items that you are looking for.

Traction Brackets are located in the Trailer Tie Down section and the Ski Guides are in the Ceiling and Floors section.

Feel free to check out the site -https://parts.mirageinc.com

You may also call the factory and speak with Trevor in our Parts Department and he can answer your questions and take you order over the phone. Call him at 208-461-7776.

 

[catssuk]

my old track off my rmk 151x2 its hard as a rock works awesum and keeps the lugs from both my mod sleds from any warpage because they fit perfect into the paddle pattern so i dont get track fatigue,best part it was free and will last 4 ever. and snow build up is non existant