track options

[damx]

On the inside of the track belt, there is a line 3/8" from outside of the track. Its only like 1 mm high, I think its from the mold when the track is made. I cut along that, and my lugs are not cut just right beside it.

 

[kidwoo]

Humm, did you cut yours like mine??? mine is not cut into the lug, the fat it just trimmed off the end.
I may have to remeasure mine, I thought it was 15 1/4”


Sent from my iPhone using Tapatalk

too wide

you're gonna have to cut it again

 

[caper11]

too wide

you're gonna have to cut it again

Mine will be fine for the sled it was built for, a doo.
Your previous description sounded familiar to what I had done. I had the track trimmed to the edge of the lug by trimming off the excess past it, and didn’t cut into the lug at all.


Sent from my iPhone using Tapatalk

 

[live2beel]

On the inside of the track belt, there is a line 3/8" from outside of the track. Its only like 1 mm high, I think its from the mold when the track is made. I cut along that, and my lugs are not cut just right beside it.

This is how I did mine with a razor knife. Took about 30-40 minutes. Just take your time.

 

[caper11]

too wide

you're gonna have to cut it again

Mine will be fine for the sled it was built for, a doo.
Your previous description sounded familiar to what I had done. I had the track trimmed to the edge of the lug by trimming off the excess past it, and didn’t cut into the lug at all.


Sent from my iPhone using Tapatalk

My bad, I think I misinterpreted what you said. I thought you said you didn’t cut into the lug.


Sent from my iPhone using Tapatalk

 

[kidwoo]

a doo.

 

[caper11]

Doo parts make a Polaris better. [emoji16]

 

[kidwoo]

Doo parts make a Polaris better. [emoji16]

when it comes to tracks, ALL parts make a polaris better

 

[Sheetmetalfab]

when it comes to tracks, ALL parts make a polaris better

I have an attack 20 and maverick track for ya.
Will trade for series 6 poo tracks. ?

 

[kidwoo]

okay not all parts

 

[Teth-Air]

Have you looked at the Russian tracks? Or at least I was told they are made in Russia?

Composit M770-3R Tracks | Shop Snowmobile Tracks

Buy M770-3R (3.00″) snowmobile tracks at Composit. Fits Arctic Cat, Polaris, Ski-Doo, Yamaha snowmobiles. We offer the best prices and popular sizes, enjoy the ride!

compositsnowmobiletracks.com

 

[Sheetmetalfab]

okay not all parts

Everything improves with updates.
I’m optimistic polaris has increased reliability after looking at the prototype tracks with 2022 improvements.

The series 8 with external track nubs, anti stab and extroverts has potential to be a solid option.

 

[kylant]

this track looks intriguing. looks like the doo track? ??‍
I think this is what I am going to do to replace my 2.75, 165
just have them cut it down to 15"

Challenger 300LX

Camoplast, Challenger 300LX, $55.00 - $1,185.00

shop.tracksusa.com

 

[kidwoo]

this track looks intriguing. looks like the doo track? ??‍
I think this is what I am going to do to replace my 2.75, 165
just have them cut it down to 15"

Challenger 300LX

Camoplast, Challenger 300LX, $55.00 - $1,185.00

shop.tracksusa.com

haha, was just looking at those

they even have the same texture as the stock doo tracks, that's gotta be the same mold

even looks like the short rod/flex track rods between the outer lugs

 

[caper11]

this track looks intriguing. looks like the doo track? [emoji2371]
I think this is what I am going to do to replace my 2.75, 165
just have them cut it down to 15"

Challenger 300LX

Camoplast, Challenger 300LX, $55.00 - $1,185.00

shop.tracksusa.com

Yep it is, it’s just not ported, that’s the track in the pic I posted.


Sent from my iPhone using Tapatalk

 

[kidwoo]

Yep it is, it’s just not ported, that’s the track in the pic I posted.


Sent from my iPhone using Tapatalk

looks like yours is fully clipped vs. every other as they're sold?

 

[caper11]

looks like yours is fully clipped vs. every other as they're sold?

I fully clipped the track and had it trimmed, there are benefits to a fully clipped track.


Sent from my iPhone using Tapatalk

 

[kylant]

i am running extroverts so I won't need to have the track center ported. also I have bags of clips and my buddy has the tool, so i will clip the remaining windows

 

[kidwoo]

tracks are backordered so I'm probably just going to go with an x3

I don' trust that anything shows up by an expected date this year and they're not expecting them till well into the season

Thanks for all the input guys!