Track clips flying off on the stand?

[sledfvr]

I just fully clipped my camo extreme and now it is throwing the clips that were on it to begin with off when I rev it up on the stand. Any idea why this is happening? I've got avids and the track was clipped every other. The only ones coming off are the original clips that were on the track.

 

[Polarisrocks]

My 2.5 did it on the stand too. tracks usa told me, they got hot and thats why they are flying off.... I say thats a bunch of bs..
Let off the throttle a bit

 

[sledfvr]

Ya the speedo said over 100 a couple times. I guess I should keep the speed down a little.

 

[paulharris]

Ya the speedo said over 100 a couple times. I guess I should keep the speed down a little.

lol u were spinning it over 100mph on the stand? no wonder the clips flew off!

 

[Brutis20]

dumb question

Probably dumb but do you actually pull boost when on the stand? I would assume it would need a load to do so? I have not spun the track that fast though! I have never really tried it, worried something would come apart!

 

[Ak_7vytr0]

no boost without load.. turbo nytro reads nothing without load... neither did the s/c mustang cobras..

 

[Ak_7vytr0]

you can spin it all day long... won't read any boost till its working...

 

[Polarisrocks]

I have seen boost on a stand with my big powerlites kit, if you grab a handfull it will atleast jump to 5-7 lbs. My sled is making 2-3 at idle. I had a dobec hooked to the intercooler at one point to just test it and it was seeing boost at idle so i added a gauge and it was true.

 

[Brutis20]

boost

Ok, thanks thats what I figured.