C chicago Free Member Nov 18, 2013 #1 What are the torque settings for the primary/secondary clutches on a 2012 Pro800
wjl Well-known member Lifetime Membership Nov 18, 2013 #2 80 ft lb for primary 17 ft lb for secondary I also use blue loc tite.
4Z Well-known member Lifetime Membership Nov 18, 2013 #3 Not sure what manual says but I use 50 lbs for Primary and just German virgin for the secondary (good-n-tight).
Not sure what manual says but I use 50 lbs for Primary and just German virgin for the secondary (good-n-tight).
R rmscustom Well-known member Nov 18, 2013 #5 Indy Dan instructions 70 ft lbs on primary, put sled on stand and repeatedly engage and disengage clutch. Retorque and repeat until it doesn't take anymore torque. Check after first ride. I use the German virgin technique for the secondary. lol Last edited: Nov 18, 2013
Indy Dan instructions 70 ft lbs on primary, put sled on stand and repeatedly engage and disengage clutch. Retorque and repeat until it doesn't take anymore torque. Check after first ride. I use the German virgin technique for the secondary. lol
