Tools you may want to Carry with for the Pro

[NapaMatt]

5mm allen Wrench

10 mm wrench

For when your bars move!!!!!!!!!!!!!!!

 

[littleanthony]

While working out on pro in the garage,(not enough snow yet)bars bent right over.Added allen and wrench to tool kit after a good tightening.

 

[aadougie]

15mm wrench for adjusting track tension...

 

[racerjb]

I just bought the Craftsman Dogbone which has 12mm through 19mm on one tool, as I wasn't sure what all sizes I will need. It seams like a good idea but haven't used it in the field yet.

 

[m8sandman]

pliers and zip ties along with some black tape always seem to come in handy when my buds are having problems

 

[redink420]

I second the 15mm wrench. No, really, carry 2 15 mm because the otherside is going to spin.

 

[NapaMatt]

A magnet it nice also.. if u drop a nut or a bolt!!

Flashlight!!

15 mm Wrench X2

Zip Ties!!

 

[IceCap]

Safety lockwire ( stronger and smaller than zip ties)

Duckbill pliers- (for exhaust springs etc...)

Knipex plier wrench 7" ( better than a adjustable wrench and opens to 36mm)

Head light ( rather than flashlight.... frees up both hands)

Multi tool

Rope

 

[Reg2view]

Throttle assembly retainer is still SAE allen. So is the team deflection adjuster.

 

[crf118r]

Don't forget the duct tape! That will come in handy if you vented your clutch side without the screen material behind it!

 

[byeatts]

5mm allen Wrench

10 mm wrench

For when your bars move!!!!!!!!!!!!!!!

Let me guess, These tools can be purchased at Napa!

 

[NapaMatt]

Yes.. All your tool need..


NAPA Get The Good Stuff!

 

[Skidooer]

Tools to adjust belt deflection.

 

[volcano buster]

2 wrenches to take the scratchers off. If you break one, you will likely want to remove it so it doesn't cause any damage. Usually need two 9/16" wrenches, but a pair of 14mm might work.

 

[ringercord]

Don't forget a number 30 Torx so you can remove the top panel on the hood.

 

[IceCap]

The spark plug tool has a torx on the end of the handle to remove the hood screws.

 

[sonday_2]

Plier, vise gribs,10mm,13mm,14mm,1/2,9/16,5/8, both socket and boxend screwdriver,phillips, most common tools that sleds use.

 

[BigBlueEdge]

Don't forget a number 30 Torx so you can remove the top panel on the hood.

You need a T40 for that, but the factory toolkit has one on the end of the spark plug wrench handle.

Rob

 

[NapaMatt]

TTT

 

[NapaMatt]

TTT