Timbersled Mountain Tamer in Axys Chassis

[Dragontex]

Does anyone know if a Timbersled Mountain Tamer rear skid will fit in an Axys chassis?

 

[ullose272]

i highly doubt it, the mounting points are likely very different, and width is narrower on the timbersled

 

[Sheetmetalfab]

i highly doubt it, the mounting points are likely very different, and width is narrower on the timbersled

The op is talking about the snowmobile suspension not snowbike suspension.

"Timbersled" made snowmobile suspension, intakes, A arms, spindles etc long before they made snowbikes.

 

[Sheetmetalfab]

Does anyone know if a Timbersled Mountain Tamer rear skid will fit in an Axys chassis?

It can fit with the beefed up drop brackets required for any coupled suspension.

It really is intended for competitive hillclimb racing and will greatly limit ski lift vs the stock suspension.

 

[grizzslayer]

It can fit with the beefed up drop brackets required for any coupled suspension.

It really is intended for competitive hillclimb racing and will greatly limit ski lift vs the stock suspension.

As SMF stated, you need to run diff drop brackets and preferably a tunnel brace.

I ran one with the coupling adj knob on a Turbo Axys; it was awesome! I'm not a big jumper, so just got away with BMP Stump Grinder drop brackets with a ton of 1/4" rivets holding it together.

 

[Dragontex]

Thanks for the help.