Timbersled 2.5" convex track on Yeti

[MFJ]

Are the drive lugs the same pitch as the yeti tracks? Anyone done this? Know where I can find some of these tracks? Thanks

 

[dooman92]

Yeti vs ts track

Yes, I believe they are the same. There have been several on this forum indicating they are interchangeable.

 

[RMK935VA]

I don't know about the interchangeability of the tracks. However, I am not sure why you want to do it. The Yeti Maxtrack 2 works really well.

 

[MFJ]

I don't know about the interchangeability of the tracks. However, I am not sure why you want to do it. The Yeti Maxtrack 2 works really well.

In powder, yes. In crusted or wet, heavy snow with a solid base, no. Paddles are too soft and just fold over in the majority of my riding conditions.

 

[RMK935VA]

Hmm, I rode a lot of spring snow this year and my track worked very well. It dug in on climbs and held on some truly gnarly sidehills. Some of that is the ski but I found the track to work extremely well. I was not sliding out on lines that a Camso equipped bike and an older Timbersled slid out on. That is my experience with the track so far. I also rode it in deep fluff earlier in the winter and it performed well in those conditions too.