Throttle body boot support

[DRAPE]

I know there's some guys out there making those metal supports for the throttle body boots, to keep them from blowing out with the turbo boost. Where'd ya get yours? Any details appreciated. thx

 

[Jonce]

I want to say a lot of the guys have been getting these from Boondockers.

 

[Jkinzer]

BD makes them, but so does brad wursten(probably spelled the last name wrong, sorry brad) 1200psi here on the forum, their about $40 and worth every penny

 

[POLARIS600cc]

I built my own, and made a batch for silber. send him pm, see if he has any left. I can run another batch, but need a minimum quantity of 10.

 

[DRAPE]

BD makes them, but so does brad wursten(probably spelled the last name wrong, sorry brad) 1200psi here on the forum, their about $40 and worth every penny

That's the one I was looking for. I think he's from Logan, Utah. Thanks bro. I guess it's worked good for ya?

 

[mountainhorse]

Brad Wursten at

http://www.poweraddictionracing.com/main/contact.pl

Makes the plates you are looking for.

His user name on the forums here is 1200psi

 

[XC700116]

I'm running Brad's Plate with no problems at all, I had gotten one from him before anyone else started producing them. Good job and a very fair price.

 

[schmitt]

I also got mine from Brad! Good guy

 

[SNOW JW]

Brad has them and I can also send you one when I send out the Electronic Boost controller $40 shipped

 

[Super Dave3]

Throttle Body Boot Plate

Brad has them and I can also send you one when I send out the Electronic Boost controller $40 shipped

Justin, put one in my box when you ship my kit.

Thanks Dave

 

[SNOW JW]

You got it!!

Thanks Dave

 

[EricW]

Justin, 2 more for me with my kit if ya would, I'm a boost pig, time to start building sleds. Thanks. EW

 

[mngoat]

I have one from Brad that i have never used. If anyone wants another...$25 plus shipping.

 

[Timbre]

I have one from Brad that i have never used. If anyone wants another...$25 plus shipping.

Wish i had seen this post a day ago.....i just bought mine. Will pass on the word to my "boosted" friends in case any of them need one.

Cheers

 

[Timbre]

Speaking of throttle body boot supports.....

Can anyone tell me where the weakest point is on the boot, that these most often blow out at? Any pix of a blown out boot that someone can share?

I have not had any experience with this yet, and have others that i ride with who have boosted sleds, so thought it might be good info.

Thanks

 

[POLARIS600cc]

Mine blew out on the right side of the mag cylinder. I don't have any pics, but it was seperated from top all the way to bottom. It was also bubbled up in the center between cylinders. Also I only ran 7-9psi so nothing crazy.