Welp, I’ve seen those wondering how and wanted to show you our set up. Luckily this trailer had a 2” receiver in the floor, near where you’d imagine super clamps to go. Well, welded up a “T” out of 2” square tubing, about 30” tall.
At first we were backing in and then man handling it up and onto the “T”. That sucked, especially after a long day of riding! So, Mike whipped up a 2x10 ramp about 6’ long with 2x3’s on edge every 18”. It worked great until the nails bent, so I added screws and some Simpson A-35’s and it’s was dialed.
Takes a little convincing to get up the ramp backwards, but all in all, it worked out slick!
Sent from my iPhone using Tapatalk
At first we were backing in and then man handling it up and onto the “T”. That sucked, especially after a long day of riding! So, Mike whipped up a 2x10 ramp about 6’ long with 2x3’s on edge every 18”. It worked great until the nails bent, so I added screws and some Simpson A-35’s and it’s was dialed.
Takes a little convincing to get up the ramp backwards, but all in all, it worked out slick!
Sent from my iPhone using Tapatalk