Im thinking of turboing my 900 mc but ran into a problem what do you do for the oil lubrication on the turbo with out losing the pump for the auto mixer?
Thinking of turboing need help tho
- Thread starter 7.3 sled head
- Start date
If you are talking about the oil that runs through the turbo bearings, you have to have a seperate tank and pump.
ya
ya those are the ones im talking about but where do you find a pump that will build sufficient psi that will work in my sled?
ya those are the ones im talking about but where do you find a pump that will build sufficient psi that will work in my sled?
E
everytime5.9
Well-known member
You need to know what type of turbo your using. A Garrett ball bearing requires very little oil to survive, a Mistsu Evo turbo or any journal bearing turbo requires more oil pressure. There is a thread in the polaris turbo section talking about the different pumps available. You can contact any of the turbo manufactures or read that thread and buy from the source. http://www.snowestonline.com/forum/showthread.php?t=203527
1
1badcowboy
Member
silber will set you up with the tank and pump for a good price and all the hoses
wow thanks
hey thanks for the help any ideas on what turbo to use want to build around 6 ibs. of boost give and take a lil bit
hey thanks for the help any ideas on what turbo to use want to build around 6 ibs. of boost give and take a lil bit
1
1badcowboy
Member
6lbs is plenty if you want to go over 7lbs it would be a good idea to put a low compression head on ur sled
where an what turbo?
where an what turbo would you recommend?
where an what turbo would you recommend?
P
product tester
Well-known member
use a garrett 2876 uses very little oil and will work at low or high boost.
Similar threads
