Does anyone sea an issue with having the belt drive completely exposed to any number of objects? WTF polaris?
The black hole
- Thread starter akmclean
- Start date
Does anyone sea an issue with having the belt drive completely exposed to any number of objects? WTF polaris?
black hole
I was thinking the same thing. Every one is blocking off footwells. what do we do about this? Water drain?
I was thinking the same thing. Every one is blocking off footwells. what do we do about this? Water drain?
It was originally a cutout for the chaincase drain plug and either Polaris overlooked it (doubtfull) or they wanted to save money and not make a different belly plate.
Sticks and rocks could be a problem. Copious amounts of snow and ice getting rammed up in there will happen and I would think this could cause hydraulic lifting of the belt as Mountain Horse mentioned in another post. In any case this is asking for a problem. If you came down on something hard enough its a one way ticket to a bent driveshaft (if they ever fix the one you have)
Tedd Unlimited has an aluminum bash plate for this area, but it has the same cutout because it was built for the 11-12's.
Sticks and rocks could be a problem. Copious amounts of snow and ice getting rammed up in there will happen and I would think this could cause hydraulic lifting of the belt as Mountain Horse mentioned in another post. In any case this is asking for a problem. If you came down on something hard enough its a one way ticket to a bent driveshaft (if they ever fix the one you have)
Tedd Unlimited has an aluminum bash plate for this area, but it has the same cutout because it was built for the 11-12's.
S
suitcase
Well-known member
Hear is Tedd Unlimited link http://www.teddunlimited.com/utvtechprormkski.html
Todd has the UTV gaurd, and can hook you up!
S
suitcase
Well-known member
<TABLE border=0 cellSpacing=0 cellPadding=0 width=1159><TBODY><TR vAlign=top><TD height=374>
</TD><TD height=374></TD></TR><TR class=f-sp><TD>
</TD><TD>
</TD><TD height=40>
</TD></TR></TBODY></TABLE><TABLE border=0 cellSpacing=0 cellPadding=0 width=1184><COLGROUP><COL width=25><COL width=594><COL width=33><COL width=41><COL width=490><COL width=1></COLGROUP><TBODY><TR vAlign=top><TD height=36 rowSpan=2></TD><TD height=36 rowSpan=2 colSpan=2>UTV Tech Polaris Pro RMK
</TD><TD height=20 colSpan=2></TD><TD height=20></TD></TR><TR vAlign=top><TD height=16></TD><TD height=110 rowSpan=4>
</TD><TD height=16></TD></TR><TR vAlign=top><TD height=13 colSpan=4></TD><TD height=13></TD></TR><TR vAlign=top><TD height=78></TD><TD height=78>We are proud to be partnered with UTV Tech to provide our customers with some of the best Polaris Pro RMK accessories available today.
We are a full line dealer for all the UTV Tech products, so if there is something that you do not see on this page, contact us and we will help you find what you need.
</TD><TD height=78 colSpan=2></TD><TD height=78></TD></TR><TR vAlign=top><TD height=3 colSpan=4></TD><TD height=3></TD></TR><TR class=f-sp><TD>
</TD><TD>
</TD><TD>
</TD><TD>
</TD><TD>
</TD><TD height=25>
</TD></TR></TBODY></TABLE><TABLE border=0 cellSpacing=0 cellPadding=0 width=839><COLGROUP><COL width=413><COL width=425><COL width=1></COLGROUP><TBODY><TR vAlign=top><TD height=350></TD><TD height=350>
</TD><TD height=350></TD></TR><TR class=f-sp><TD>
</TD><TD>
</TD><TD height=5>
</TD></TR></TBODY></TABLE><TABLE border=0 cellSpacing=0 cellPadding=0 width=839><COLGROUP><COL width=413><COL width=425><COL width=1></COLGROUP><TBODY><TR vAlign=top><TD height=266></TD><TD height=266>UTV Tech Polaris Pro RMK Belt Drive Skid Plate
Protect the belly pan and drive belt of your 2013 Pro RMK from damage.
The new belt drive has very little clearance below it, allowing the belly pan to flex and come in contact with the lower pulley and belt.
Prevent that from happening with this skid plate from UTV Tech.
Also fits the 11' & 12' Pro RMK to protect the chaincase.
Pro RMK Belt Drive Skid Plate:
$55.00
</TD><TD height=266></TD></TR><TR class=f-sp><TD>
</TD><TD>
</TD><TD height=14>
</TD></TR></TBODY></TABLE><TABLE border=0 cellSpacing=0 cellPadding=0 width=706><COLGROUP><COL width=545><COL width=160><COL width=1></COLGROUP><TBODY><TR vAlign=top><TD height=29></TD><TD height=29>
</TD><TD height=29></TD></TR><TR class=f-sp><TD>
</TD><TD>
</TD><TD height=11>
</TD></TR></TBODY></TABLE><TABLE border=0 cellSpacing=0 cellPadding=0 width=886><COLGROUP><COL width=365><COL width=520><COL width=1></COLGROUP><TBODY><TR vAlign=top><TD height=16></TD><TD height=16>Copyright © 2011-2012. Tedd Unlimited L.L.C. All Rights Reserved
</TD><TD height=16></TD></TR><TR class=f-sp><TD>
</TD><TD>
</TD><TD height=1>
</TD></TR></TBODY></TABLE>
</TD><TD height=20 colSpan=2></TD><TD height=20></TD></TR><TR vAlign=top><TD height=16></TD><TD height=110 rowSpan=4>
We are a full line dealer for all the UTV Tech products, so if there is something that you do not see on this page, contact us and we will help you find what you need.
</TD><TD height=78 colSpan=2></TD><TD height=78></TD></TR><TR vAlign=top><TD height=3 colSpan=4></TD><TD height=3></TD></TR><TR class=f-sp><TD>
Protect the belly pan and drive belt of your 2013 Pro RMK from damage.
The new belt drive has very little clearance below it, allowing the belly pan to flex and come in contact with the lower pulley and belt.
Prevent that from happening with this skid plate from UTV Tech.
Also fits the 11' & 12' Pro RMK to protect the chaincase.
Pro RMK Belt Drive Skid Plate:
$55.00
</TD><TD height=266></TD></TR><TR class=f-sp><TD>
</TD><TD height=16></TD></TR><TR class=f-sp><TD>
T
Tedd
Well-known member
Just an FYI... We have been working with the manufacturer of the skid plate to have that relief removed from the design. We will have the new plates available towards the end of the week first part of next week.
L
littleanthony
Member
Why does this always happen to me, what about the guys that purchased current piece not knowing about drain hole? I would have waited and killed two birds. not happy
LA
T
Tedd
Well-known member
LA, this has only been in the works for the last 3 or 4 business days. We received word today that the change was being made to the design.
8
827revdog
Well-known member
Going to hold off installing mine and get the new version. When can we order them ?
Is it possible to get it powercoated in Black?
L
littleanthony
Member
what does this mean? upgrades for people that bought last week and installed?
shafted...again.
it means just like your driveshaft, you got revision number 1. It also means we are probably **** out of luck!
it means just like your driveshaft, you got revision number 1. It also means we are probably **** out of luck!
T
Tedd
Well-known member
Unfortunately we are not set up for powder coating.
T
Tedd
Well-known member
What this means is that we are not the manufacturer of the skid plate. We are simply a dealer. I would be more than happy to talk with the manufacturer and see if they would be willing to work something out as far as an upgrade or trade in. I can't guarantee anything will happen with that, but I can sure try.
Being the dealer of the product, we provided the best product available at the time it was available. The manufacturer decided to make a change to the product which was out of our control.
T
Tedd
Well-known member
We should have them in stock late this week or early next week.
Tedd - sorry for opening a can of worms for you. I'm just trying to get a plate that does it all. People should remember that you are a distributor for the plate and not the manufacturer. Its evident you are in tune with the customer.
Is there a way I can get an order in for two of the updated plates now so they will ship as soon as you get them?
Is there a way I can get an order in for two of the updated plates now so they will ship as soon as you get them?
T
Tedd
Well-known member
You can email me at sales@teddunlimited.com, order them off the website www.teddunlimited.com, or call me at 541-221-6838.
As soon as the new plates arrive, we will get them shipped out to you. We will also update the photo on the site.
As soon as the new plates arrive, we will get them shipped out to you. We will also update the photo on the site.
8
827revdog
Well-known member
tedd if we order now will the updted one be shipped or wait till the option is there on the site?
