S
Seems the coolant hose that runs horizontally from the engine to the thermostat housing has a trademark in the sealing surface. Bizzare right? Ours did not leak until 500 miles and even then it was a few drips in the sled deck and almost always when cold. And yes clamp was tight.
But, knowing what I do now I would suggest if you get this leak to reposition the hose clamp as far as is safe to the end of the hose.
First pic is of the hose.
Second pic is of the hose location
![hosemount.jpg hosemount.jpg](https://www.snowest.com/forum/data/attachments/202/202469-5754353f911b14b6adfdbf8fade68447.jpg)
But, knowing what I do now I would suggest if you get this leak to reposition the hose clamp as far as is safe to the end of the hose.
First pic is of the hose.
Second pic is of the hose location
![hose.jpg hose.jpg](https://www.snowest.com/forum/data/attachments/202/202461-a193cef6ffb60c3b129120a3b41b3f4a.jpg)
![hosemount.jpg hosemount.jpg](https://www.snowest.com/forum/data/attachments/202/202469-5754353f911b14b6adfdbf8fade68447.jpg)