Tail light wires

[kidwoo]

Remind me. Brown, orange red, which is which?

thanks!

 

[HECKS]

Brown = Ground

 

[kidwoo]

Brown = Ground

You know which is constant and which is brake?

 

[kidwoo]

Derp. Helps to look a little closer sometimes.

 

[HECKS]

 

[kidwoo]

Fun fact. I wired up and soldered the wires you think would go where they go but the brake circuit was getting shorted. As in parking light on, and sled wouldn't go into reverse. I used the 20 dollar cheapo LED light SLP sells but had to disconnect the constant power wire. I'm fine with having just a brake light but interesting to know.

 

[HECKS]

Weird.
SLP light looks to be Black=Ground / Red=Brake Light / White=Tail Light.
AXYS wiring diagram matches your picture Brown=Ground / Orange=Brake Switch / Red/White= Power

 

[kidwoo]

Weird.
SLP light looks to be Black=Ground / Red=Brake Light / White=Tail Light.
AXYS wiring diagram matches your picture Brown=Ground / Orange=Brake Switch / Red/White= Power

View attachment 397431

Haha, classic. I was about to correct you on the SLP config but what you listed is what's on their website.

https://www.startinglineproducts.com/media/instructions/LED_brake-light.pdf

HOWEVER........this is what came with the unit.