Sway Bar delete with Fox Float 2

[aninchlow]

Has anybody nuked the swaybar with the fox float 2's? I'm having trouble leaning this sled over in the powder.... not a huge trail rider but we do need to ride quite a way in on the trails in Revy....

ideas?

 

[BIGGDAWG]

i removed the sway bar on mine with float 2's, i upped the pressure to around 95psi to 105psi i run about 75 with sway bar. it was pretty twitchy on the trail. most guys like it i didn't so i put the 09 dragon sway bar on mine since i had the 09 front end on it anyhow. it is a smaller bar and works great for me.

 

[mountainhorse]

Have a look at this thread...
http://www.snowestonline.com/forum/showthread.php?t=252275

You really don't want to "lean the sled over" but, rather, get the sled "on edge" .

 

[Z-Man]

Has anybody nuked the swaybar with the fox float 2's? I'm having trouble leaning this sled over in the powder.... not a huge trail rider but we do need to ride quite a way in on the trails in Revy....

ideas?

Find yourself a nice open field of powder. Turn the skis to the left and lean to the right and hit the throttle and feel what the sled does. The turn them right and do the same thing. The IQ chassis will countersteer up onto it's edge with almost zero effort and carve the opposite direction of the steering input. Practice this until you figure out how to make the sled do the work for you.

If you are currently trying to grab the bars and hang off the side you want to go while turning the skis in that direction, you are just wearing yourself out fighting your sled, and removing the swaybay is not going to help you.