Straightline Performance Carbon Fiber Silencer

[GoBigParts]

do you know if this uses either of the "hanger" mounts that the stock 13 can utilizes?

Lightest muffler in the industry at just over 3lbs. Guaranteed not to lose HP. The carbon fiber muffler will fit 2010-13 Polaris Rush/Switch/RMK. The industry leading carbon fiber muffler has become leading seller in the Ski-doo line-up with its proven durability and proven performance. Simple installation, no jetting required.

It must fit the 13 and the mounting must be the same as the 12. It list 2010-2013.

 

[rotax]

The 11 lbs lighter is from the weight of a stock rush muffler. It weighs more than the pro rmk stock can.

That makes sense, bit of a technicality... They should give a proper weight saving for each sled then.

I think SPI does more midwest stuff...so comparing to the Rush makes more sense, but make that point clear.
Fwiw I'm pointing fingers at SPI not Paul's site or company.

This can does not save 11# on a Pro RMK.

Anyway, SPI makes good stuff, not hatin', just want accurate info for the masses.
I know most will see CF and think "cool" and thats all the further it goes..

They could also put a little more effort in the info; most 800 CFI's that I've seen don't require jetting....since, their EFI....

 

[dotter]

can

Friend has one on etec he likes It, I think it's wayyyy too loud

 

[Sask900]

You guys are *****'s I have one on my
Sled and it is awesome

 

[byeatts]

You guys are *****'s I have one on my
Sled and it is awesome

I,m betting this is a Carbon sleds parts can with SPI name. Its identical to my CSP can. anyone get a measurement of the outlet dia, is it 1.90 in.?

 

[turboless terry]

Is yours obnoxious like everyone says? Awesome looking but i don't want obnoxious. Probably won't work great with a muffpot.

 

[Rydogggg]

I had one on my skidoo xp 800 and it was loud, sold it after 80 miles

 

[byeatts]

Is yours obnoxious like everyone says? Awesome looking but i don't want obnoxious. Probably won't work great with a muffpot.

Well mines on a 880 Doo and pipe has a larger stinger so that reduces the sound levels a Tad but yes they are noisy . For high elevation these cans are suspected to be too loose and reportably lose RPM,s on the Doos. I installed a restrictor reducing the outlet Dia to 1.75 in. witch matches my other High altitude cans to test. They are light .These cans all look the same with different pipe bends and thats why I asked if someone can measure the outlet dia. Mine was 1.90 in.The tone is nice and sound similar to a glass pack muffler but bark WOT.