Still time - Here's what I want for '13!!

[JSun]

Ok Poo, I want a 2013 Pro RMK 600 144", belt drive, all the goodies the 800 is getting. 407 dry. That way with an HPS can I'll be at 400 lbs and I want MSRP at $10,200.00 with a four year bumper to bumper warranty. Thanks.

Joe

 

[AKSNOWRIDER]

wont happen..the 12 600 weighed the same as the 800(same identical sled and the motors share the same basic block/crank/cylinder setup...).but 417 pds isnt anything to sneeze at either...

 

[Excalibur]

I will take two!

 

[NDFARMER95]

Im thinkin they should make a 2013 800 146 PRO, a 2.4 track, new pro boards, WE needles, with belt drive at about $12k.

 

[JSun]

wont happen..the 12 600 weighed the same as the 800(same identical sled and the motors share the same basic block/crank/cylinder setup...).but 417 pds isnt anything to sneeze at either...

That's why I want a 144. The review on snowmobile.com shows the 600 a couple pounds lighter, and I figure 9 lbs or so difference between the 155 and 163, so...

I think a 600 that was 400 dry (130ish HP) would rock.

Joe

 

[Tuok]

Im thinkin they should make a 2013 800 146 PRO, a 2.4 track, new pro boards, WE needles, with belt drive at about $12k.

That's something I would like to see

 

[AkLogan]

Would also take the 144 to be a coil over. Which they have yet to do.

 

[JSun]

Would also take the 144 to be a coil over. Which they have yet to do.

Exactly... An actual Pro RMK, not Switchback-based which is essentially what the 2012 144 RMK is.

Joe

 

[winter brew]

Why not the 800...a arms and exhaust and you're under 400.

 

[JSun]

Why not the 800...a arms and exhaust and you're under 400.

Good point, but I guess I just trust the 600 motor a little more... Could just be negative hype with no facts, the motor just worries me.

Joe

 

[sledr900]

Powdercoat

Can we also get powdercoated rails and tunnels like the cats and doos?

 

[TRS]

I want a 163 with the carb 600 HO

 

[MN_SUMMIT]

Joe,

You must be dreaming at work again! I agree with what you want, but i know it wont happen...hey, still want to trade my hood if ur interested lol...

Kurt

Ok Poo, I want a 2013 Pro RMK 600 144", belt drive, all the goodies the 800 is getting. 407 dry. That way with an HPS can I'll be at 400 lbs and I want MSRP at $10,200.00 with a four year bumper to bumper warranty. Thanks.

Joe