Steering arm/tie rod length needed for Skinz concept swap

[OrangeKowJumper]

I'm switching out the stock Assault front end for a skinz concept setup and need the length of the Axys RMK steering arm . ..just arm length ...no ball joints included .. just arm as I'm gonna cut down longer ones I already have . .anyone have one laying around or a machine apart that could be measured for me??. . thanks. .

Johnny

 

[OrangeKowJumper]

Actually according to the parts fiche the pro version of the steering arm works too so the pro RMK or the axys RMK either one... If anyone has one out or one is accessible on a machine to measure the length... Thanks

 

[Spaarky]

If you have the concept kit, I believe it comes with new steering rods. I think all ours did.

 

[OrangeKowJumper]

Spark . .I bought the kit at Haydays and the arms were not in the kit . .had a buncha extra parts that made me think I was getting extra stuff aside from the regular kit ..but the arms were not there. ..I have a couple from another rebuild that I can cut and thread if I get a length .. . .and since you've done the kit. . .you have arms laying around in a tub somewhere you can measure for me .. . .right???

 

[Elkaholic4life]

This is the stock rod out of a 2013 pro rmk.

 

[Elkaholic4life]

 

[OrangeKowJumper]

Thanks Elky . .yer friggin awesome . ..i read that as just shy of 11 3/8..accounting for angle of camera..appreciate it much..