Stator question using a 2011 in a 2015.

[The Bob]

Does anyone know if a stator from a 2011 or 2012 (same part number, 4012939) will work in the 13+ 800's (4013413)? They all run the same flywheel, but different part numbers from for 2011/12 to 13+ stators.

Have access to a 2011 stator/flywheel setup. Have a extra short block for my sled and thought it would be nice to not have to swap electric if I have to do a "mid-trip engine swap".

Thanks guys.

 

[rmkboxer]

the stators are different and flywheels are different I think. the plugs are different on the stator

 

[The Bob]

The flywheel part number 4012121 goes back to 2009 and up to 2016 600 and 800's. I wish it was the other way around and that was the stator, they tend to be a bit harder to find or at least more expensive than I could of probably gotten this one for.

Thanks. Any other input would be great.

 

[LoudHandle]

The flywheels are indeed the same and interchangeable. The stator is physically / functionally the same but they changed the connectors and wire length in 2013. Both the 2011 and the 2012 have longer wires coming off the stator so they can be updated to the newer wire length and connectors.

I have all that information and connector part numbers but I'd need to dig it out.

Or if you'd prefer I have an '11 here I can update and send to you already updated.

PM me if either option is of interest to you.

 

[LoudHandle]

This thread has all the info on the connector upgrade

http://www.snowest.com/forum/showthread.php?t=390470

Reference post number 9 from MountainHorse For the links to the connector parts and wiring diagrams.

As a side note; when I bought everything to do the '11 I have here, I bought a two full sets of connectors, seals , plugs, etc.

So i have an extra set available, if someone wants it PM me.