Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

'Snorkle'

L

Lank

Member
Running a Boondocker kit on an Apex with the air intake next to the turbo. This setup is terrible in the deep powder, and we have a bunch of that. What are you using for a longer air intake tube or how are you setting up your Boondocker kit so it can breathe?
 
This is the setup on mine. You can get your tubing at turboaddiction.com. Straight sections or angled, then cut to length. Sorry for the dirty sled!

cid__1224000815.jpg
 
That looks good, does it seem tall enough to eliminate the trouble? Thank you very much for the posting.
 
Yes it is almost too tall most of the time. It has been buried before, and no issues. It isn't secured to anything towards the top and doesn't seem to flop around, rides nice. I've rolled the sled a few times and has held up great.
 
You can also get away with just a taller filter. Doesn't look all that great, but it works. This is JTAB's old sled and it runs hard with no problems in the powder.

06apex10.jpg 06apex4.jpg
 
Yes it is almost too tall most of the time. It has been buried before, and no issues. It isn't secured to anything towards the top and doesn't seem to flop around, rides nice. I've rolled the sled a few times and has held up great.



I got that same 45* elbow that it appears you have from turboaddiction. I am assuming you a bit off of yours as mine seems to be longer. Any idea how much you cut off and how/why you decided to cut as much as you did?

Thanks.
 
Premium Features



Back
Top