Smoked my Diamond Drive

[smv sledhead]

This sucks. I knew it would happen. It's the payoff of fun at 15 lbs of boost, I guess. So what do I replace it with? BDX? Rebuild the stock one? What's everybody else doing? Thanks

 

[mmsports]

bdx high torque dive

They have a new high torque gears I have one at the store 65/56 the only way to go.

 

[Vertical-Extreme]

They have a new high torque gears I have one at the store 65/56 the only way to go.

Arctic Cat hi torque gears? Or bdx gears ?

 

[mmsports]

???

Cat only has stock gears.

Bdx just put together high torque gears that are straight instead of slanted to stop from shearing.

Arctic Cat hi torque gears? Or bdx gears ?

 

[Vertical-Extreme]

Cat has stock gears.

Bdx just put together high torque gears that are straight instead of slanted to stop from shearing.

Cool. Thanks Kevin that is good to know it sounds like that is what I will be needing. I took my bdx 60/60's out and put the stock 57/63 set back in, but I don't want to run them that long. You have any used 09 drives kickin around there?

 

[mmsports]

yes

I have a 09 m8 out of my turbo I always put the Dd light in. I have drivers to if that what you ment.

I also have a couple of new Dd 60/60 and 57/63 for 07-08 complete 750.

 

[mynewuseddoo]

They have a new high torque gears I have one at the store 65/56 the only way to go.

65/56?? You sure about that? Lol

 

[mmsports]

lol

OOPS I MIGHT be a little dyslexia.

65/56?? You sure about that? Lol

 

[Vertical-Extreme]

I have a 09 m8 out of my turbo I always put the Dd light in. I have drivers to if that what you ment.

I also have a couple of new Dd 60/60 and 57/63 for 07-08 complete 750.

I think I found a d drive up here in Canada, it has the bearing update done already, I will just need to swap the gears for the bdx set. ( sorry for the hijack)