SLP Powder Valves Worth It???

[po-dunk rider]

I ordered slp powder valves for my 09 D8 and after I saw them I was a little leary of installing them and wanted some input from those that have ran them, if they are good or bad... thanks

 

[akrevrider]

Power Valves

I have ran the Power Valves for two seasons with really good results. They make a huge difference in deep powder performance on the IQ. Not to hard to install. Clean the airbox out really good after the install.

Good luck

akrevrider

 

[po-dunk rider]

I know there has to be more people with some good or bad information on the powder valves????? Akrevrider, where on the airbox did you end up putting them?>

 

[Hbmtr]

i have them on my dragon. i just followed slp directions on install.you really never know they are working because you cant see them in action under a load,but when your intakes are full of snow on a deep day its nice to know they are there.

 

[po-dunk rider]

thanks for the info. Man not many people must be runnin the powder valves or just dont want to give any input on them.....

 

[akrevrider]

I know there has to be more people with some good or bad information on the powder valves????? Akrevrider, where on the airbox did you end up putting them?>

I installed the Power Valves on the back of the airbox using the template. They are mounted toward the top on the back of the airbox & covered with SLP pre-filter material.

No doubt that the PVs work as advertised in snow up to my windshield, no bog at all. I highly recommend them. Enough said others can chime in.

Good luck

akrevrider

 

[800poodragon]

I installed them on my 08 D8 and they work great. No problems with them here. I would recommend them.

 

[mountainhorse]

I have them and love them... installed on my D7 and 900 with FNI intake.

http://www.slp.cc/catalog.cfm?pageID=detail&catalogID=3&catID=21&productID=1138

It is nice on those super deep days when all the fresh-air intakes on my sled are plugged up...

I put some basic FrogZskin mesh over them (self adhesive) to keep out any belt dust after the install.

http://www.frogzskin.com/

OR

http://www.straightlineperformance.com/catalog/index.php?cPath=144_162_164

SLP Powder Valve

 

[RockinMntKing]

oh po-dunk just put em in you already got em dont ya it couldn't hurt to have them there!

 

[traveler]

I have them and love them... installed on my D7 and 900 with FNI intake.

http://www.slp.cc/catalog.cfm?pageID=detail&catalogID=3&catID=21&productID=1138

It is nice on those super deep days when all the fresh-air intakes on my sled are plugged up...

I put some basic FrogZskin mesh over them (self adhesive) to keep out any belt dust after the install.

http://www.frogzskin.com/

OR

http://www.straightlineperformance.com/catalog/index.php?cPath=144_162_164

SLP Powder Valve

Frog skin! ya